SEVEN SINS & PSYCHO
Lighting Systems
Taillights
Headlights
License Plate & Accent
Helmets & Optics
Magnetos & Ignition
Gas Tanks & Accessories
Fenders
Primary & Transmission
Bars : Pegs : Kicks : Grips
Seats
Front-Ends
Engine
Oil Tanks & Accessories
Tires : Wheels : Brakes
Exhaust Pipes
Frames : Tails : Castings
Fuel : Carburator
Clothing & Accessories
Tools
Chemicals
Roth Metal Flake
  Authorize.Net Merchant - Click to Verify



  Home > Lighting Systems > Taillights >

  Seven Sins Vintage Microphone Taillight for Motorcycles & Hotrods



 
Our Price: $300.00



Standard or Star-Torx Security Kit: 		  

Qty:
Description
 
VIISC GENIUNE PARTS : ORIGINAL VINTAGE MICROPHONE TAILLIGHT
* Top Seller *
Seven Sins Choppers Vintage Microphone Taillight TM for custom builds. This super unique taillight is made from an original authentic microphone casing in a metal aluminum alloy; the inside is cast in a solid smooth red resin and has several sealed LED lights for illumination. This is a dual circuit light (one circuit for the running light and another circuit for the super bright brake light). This pure vintage-class taillight comes with a 2.5" x 7/8" (1/4" thick) stamped stainless steel mounting bracket, a stainless steel button-head cap screw with  a stainless locking nut and a special locking screw/nut which attaches the microphone to the bracket. Taillight Size: 2"W x 3"D x 3 5/8H". This piratey lantern-esk light is ultra bright and highly visible (like a glowing rock of lava) from all angles; it would bring any custom build to that higher level. The light in off mode is a rich deep red. The mic casing and internal components are designed to resist moisture, vibration, and chemical exposure. Designed by David Ryan and Brian Scott of Seven Sins. Made in USA. 

1 Year Warranty:
Seven Sin Choppers will replace, repair or refurbish any Seven Sins taillight bought through our store for up to 1 year from the date of purchase; less shipping fees. This warranty is only for electrical internal/electrical components. After 1 year you can still get any part of your taillight fixed or replaced if needed for a nominal service fee.  Hardware accessories are also listed under our parts category.

" Very cool tail light! " - Crocker Motorcycle Co. 2010

DISCLAMER: SSC has no way of installing our taillight on customers motorcycles or hotrods. It is the purchasers responsibility to install taillights correctly and to periodically check all hardware for any wear, damage or loosening. Please make sure you install and tighten all components correctly. Incorrect installation can result in serious injury. Red thread locker is advised for all threaded components.“This microphone design and configuration is a registered trademark of Shure Incorporated. Shure Incorporated is not affiliated with either Seven Sins Choppers, and Shure Incorporated does not license, sponsor, endorse, promote or otherwise approve of their products.”