SEVEN SINS & PSYCHO
Taillights & Headlights
Helmets & Optics
Magnetos & Ignition
Gas Tanks & Accessories
Fenders
Primary & Transmission
Bars : Pegs : Kicks : Grips
Seats
Front-Ends
Engine
Oil Tanks & Accessories
Tires : Wheels : Brakes
Exhaust Pipes
Frames : Tails : Castings
Fuel : Carburator
Clothing & Accessories
Tools
Roth Metal Flake
  Authorize.Net Merchant - Click to Verify


You are here: Home > Tools
Sort By:
Page of 1
Top Dead Center TDC Tool - Triumph - '68 & Up
Triumph Top Dead Center TDC Tool - 1968 & Up
Our Price: $18.95

TDC (Top Dead Center) tool to help you easily locate TDC on your 500 / 650 c.c. Triumphs. You will need this tool for proper installation for your Morris/Joe Hunt Magneto, electronic ignition, or points. You simple remove the nut on the top of the crankcase right behind the cylinders then screw this tool into the hole. Rotate your motor and lightly drop this plunger tool on crank into the slot; this is TDC. '68 & Up Triumphs.
Top Dead Center TDC Tool - Triumph - Early - up to 1968
Triumph Top Dead Center TDC Tool - '63-'68
Our Price: $18.95

TDC (Top Dead Center) tool to help you easily locate TDC on your 500 / 650 c.c. Triumphs. You will need this tool for proper installation for your Morris/Joe Hunt Magneto, electronic ignition, or points. You simple remove the nut on the top of the crankcase right behind the cylinders then screw this tool into the hole. Rotate your motor and lightly drop this plunger tool on crank into the slot; this is TDC. BSF (British Fine Standard) thread for early '63-'68 Triumphs.
Spark Plug Wire Tool
Spark Plug Wire Tool
Our Price: $45.00

Spark plug wire tool strips 7mm and 8mm ignition wires, and crimps spark plug and distributor terminals.
Triumph Cam Gear Tool
Triumph Cam Gear Tool
Our Price: $77.00

This tool removes and installs the cam gears on your Triumph twin and is a needed important tool for any rebuild or for changing cams.